Change Oil Indicator Reset

[Jonojeep]

A big thank you Glug Glug your way worked for me 2012 overland 5.7. Cheers

[Treebreakerbob]

For MY11 - 13 the instructions are in the vehicle handbook and are as Glug Glug posted

Don’t know about later models but I would presume it would also be there as well

Bob

[GCDingo]

So I just did my 30k service on MY15 and had to use sockeyes way so guessing 14 on would use the accelerator 3 times method.

[Jimmy777]

Hey guys, thanks for everyone's input. There is some key differences with various models but i finally got it work in my GC 2014 Limited Ecodiesel.

Cycle ignition to run without foot on the brake.
Press accelerator to floor 3 times and hold down on the third,
Press and release brake 6 times, (Leave foot on accelerator)
while leaving the accelerator depressed to the floor, cylce the ignition back to off and then to run again (without starting) then to off.
Now start vehicle as per normal.

I had to do it 2-3 times. The final go before starting the sequence, I left the jeep sit for 1-2 mins to wait for the electrics and computer to fully shut down and dash to go black. Then go for it!!

100% oil life you beauty!