Quote:
Originally Posted by inazumax
It bolts directly to the chassis doesn't it? Wouldn't the bolts have to be the same?
|
if you read it the Uneek requires drilling upgrading the 6mm bolt holes (prob 8mm) from the manufacturer intended for the plastic basherplate to a 10mm bolt hole (prob 12mm hole).
"Competitors use existing bolts for a complete bolt on product however the existing bolts are only tiny M6 designed to hold on the factory plastic cover, not take a hit from a rock or rut that your car has slid on to. Uneek 4x4 recognize this and therefore as the customer to drill 3 holes in order to use High tensile M10 bolts"