JK: Hunty's Jeep

[trbn8r]

Originally Posted by timbotrog

Actually Hunty, 80 channels is not only legal, it has been in operation for several months already. Over the next few years it is becomming the ONLY LEGAL form of UHF cb radios.
Here's a link to the ACMA website
http://engage.acma.gov.au/400-mhz-changes/
Currently the steps between channels are 25Khz, they are becomming 12.5Khz.
Might be time to start planning an upgrade of those old 40channel only uhf radios.

Hi guys,

I am not very good with technology but what I can understand is that the channels on my old radio 1, 2, 3, 4, 5....... will be equivalent to the new 1, 3, 5, 7, 9........

Correct me if I am wrong but that wont render my radio useless....


Cheers

Mani

[hunty]

Originally Posted by timbotrog

Actually Hunty, 80 channels is not only legal, it has been in operation for several months already. Over the next few years it is becomming the ONLY LEGAL form of UHF cb radios.
Here's a link to the ACMA website
http://engage.acma.gov.au/400-mhz-changes/
Currently the steps between channels are 25Khz, they are becomming 12.5Khz.
Might be time to start planning an upgrade of those old 40channel only uhf radios.

Hi Timotrog
I was just being a sm@rtass s#i$ stirrer when I said illegal - im actually looking @ the GME TX3340 remote head - i have a spare plastic top for my JK dash - there is some talk by uniden of there being an upgrade possibility for my old rig - i wont hold my breath though. I have been very happy with my Uniden - would be a shame to have to dump it!
cheers Hunty

[hunty]

I Just weighed my JK at the Nth Ryde waste transfer station and the scale 2340kg with me in it

I have a socket set, spanners & small tool bag, second battery, winch, front & rear bar, spottie bar and hilift Jack.

no roof, no rear seat

[Wallyd]

Hunty, are they seat covers or did you re trim your actual seats???

[hunty]

Originally Posted by Wallyd

Hunty, are they seat covers or did you re trim your actual seats???

Hi Mate
Yes there real...... actually I got my factory seats covered so I can take of the covers and go back to my original seats if need be. Hey Wally if you want their contact detail just pm me
cheers Hunty

[hunty]

Hi Guyz
I was reprogramming my aeroforce gauge earlier today and noticed that I had a bolt almost completely out - it had worked loose somehow.

As I stated in my Cape trip report that nothing had worked loose and my Jeep had survived the nearly 8,000km trip so it must have worked loose since then LoL

I am not sure what the bolt does and didnt really look into it - my guess is that it has something to do with lowering the front windscreen - that or its structural / roll cage related D'oh.

My advice to all JKers is take a look and see if yours is OK

its easy to get to .......

theres an access whole in the plastic A pillar trim

Cheers Hunty

[hunty]

Hi guyz
I thought some of you needed a little help maintaining your Jeeps so I thoughtfully provided this little flow chart to help youz all out! LoL