I was getting an injector #1 code last year. Ordered an injector from Rockauto & replaced it. All good.* Just a bit of work to do it, as you have to remove the inlet manifold to get to the injectors. The injector was fairly cheap, (<$100), unlike the ones for the CRDs.
#4 will be middle one on the left side.
*Except that I also replaced all the plug leads as well & managed to swap #1 & #3 even though I checked that I had them right 3 times before I tried starting it... After that was sorted though, all good.
This was for the 3.8, not the pentastar, so YMMV.
__________________
Jeeps: Lego for grownups!
Last edited by Banshee; 09-04-2018 at 07:17 AM.
|