Quote:
Originally Posted by Bryceee
I know I have already asked this, but I can't find my question or answers.
I have 265/75r16 MT 4 Rib ATZ on a 2DR , no front bar, but BlackJack Welding American Armour rear bar. What should I be running the tyres at on the road. I currently have them at 34/35.
|
They are 10 ply side walls so the side walls are a bit stronger than my 285/70/17's (that are 8 ply) or the OE tyres.
I'm running mine at 32psi (on a 4dr CRD) and find they're wearing evenly at that (after about 30,000km, rotating every 5,000km).
You've got slightly smaller tyres but you've also got stiffer side walls and a lighter 2dr petrol JK so I'd say 34psi may be too much. Basing on what I've seen with mine I'd probably try 30-32psi and then check the wear after a couple of thousand km's. The other thing to review is the ride. If you find it's a bit choppy (due to the stiffer side walls), try knocking a couple of pounds out of the tyres and see if the ride softens up.