Help needed with ARB bumper brackets

[ausjeeper]

G'day all,

I bought used front and rear ARB bars and need help with where to fit the following:

Exhibit A:
An L shaped bracket:




Exhibit B:
Front bar near the fog lights, but what is the use for it:



Thanks

Bernard

[JasperJ]

PM Seacomms, Bernard, he just recently fitted his second hand front ARB bar, he'll be able to point you in the right direction.

[my2007jk]

http://www.arb.com.au/media/products...53/fitting.pdf
Above is the instruction manual for the bar by ARB. The 2nd figure is the captive nut.

[Yom]

A is for the rear bar. That piece goes inside the chassis rail and matches up to the hole positions on the brackets.

B is for the front bar and is the bolt which goes through the chassis rail (which you may be required to drill)

[ausjeeper]

Thanks Guys, now I just have to figure out the number plate relocation. I will have to get a crimping tool set for the wiring.

Please explain how to wire the rear plate lights to the spare wheel?

Cheers