Commander owners post your pics.

[valpacer]

Thats a really nice combo there mate! Tastefully done!

[GPCDR]

Originally Posted by JRJ33P

got all the rhino rack gear on finally! waited a month for this particular rack to come into stock.

so the roof is sorted...... spare tyre, shovel and hi lift holders, awning, my IPF's are all mounted, and a little Narva LED work light off the back.

Great looking roof rack, how does it attach?

[JRJ33P]

Originally Posted by GPCDR

Great looking roof rack, how does it attach?

thats Rhino's current Pioneer welded tray, they simply mount onto RLCP13 feet (spacific to Commander - mounts to roof rails). These trays are not like the old style that mount onto cross rails, the cross rails are integrated into the rack, therefore allowing it to sit closer to the roof and have less wind resistance.....well thats the theory anyway, not going to be the case with mine! lol

[GPCDR]

Originally Posted by JRJ33P

thats Rhino's current Pioneer welded tray, they simply mount onto RLCP13 feet (spacific to Commander - mounts to roof rails). These trays are not like the old style that mount onto cross rails, the cross rails are integrated into the rack, therefore allowing it to sit closer to the roof and have less wind resistance.....well thats the theory anyway, not going to be the case with mine! lol

I have Rhino cross bars, so the legs off these may fit, which model Poineer tray are you using?

[JRJ33P]

Originally Posted by GPCDR

I have Rhino cross bars, so the legs off these may fit, which model Poineer tray are you using?

sorry for the late replies, I havent been on the computer alot lately...

umm, my particular one is the Pioneer welded tray 1800 x 1280 (internal) 41103 -------> http://www.rhinorack.com.au/AccSubCa...-Trays_72.aspx
these ones are very popular at the moment and rhino is struggling to keep up, so you might have to wait a bit if you want this one.

however there is also the standard Pioneer tray which doesnt come with the sides, with those ones you can buy the surrounds and mix and match them to how you want you rack to be set up.

Pioneer Tray

http://www.rhinorack.com.au/AccSubCa...tforms_68.aspx

and the different rail options

http://www.rhinorack.com.au/AccSubCa...ptions_69.aspx

your rhino feet will also fit these racks.

if you are going to consider one, make sure you get a minimum width of 1280mm (internal), anything smaller will be too small.

[JRJ33P]

poser taken at Chaffey Dam (SE Tamworth) over xmas / new year

[multihull]

Here's two shots from last weekend. It's a beautiful place to visit with a wide variety of terrain. It's great in the wet as it doesn't get too boggy. When all the other parks and venues are impassable The Springs is always open.