What have you done to your JK this week? 2.5M Views

[SeaComms]

The top face of my ARB front bar has been slowly getting worse and worse, with the powder coating being etched by road grime or possibly Glasshouse Mountains mud...

This is a pic after polishing it on the weekend:


So I decided to do something about it and picked up some cheap cutting polish to use with the lambswool buffing pad I had lying around in the garage. If you do this, make sure you cover everything with towels - I covered the whole front end then found splashes of cutting compound on the windscreen and the rear plastic guards (which is a pain to get off again...) After cutting it back I hit it with some NuFinish to try and keep the surface unmarked for a while.

The end result is very pleasing, with it looking like new again! (the marks in the pic are actually a reflection of the palm tree in the garden and the guttering on the house!)

[Green Goblin]

Originally Posted by SeaComms

The top face of my ARB front bar has been slowly getting worse and worse, with the powder coating being etched by road grime or possibly Glasshouse Mountains mud...

This is a pic after polishing it on the weekend:


So I decided to do something about it and picked up some cheap cutting polish to use with the lambswool buffing pad I had lying around in the garage. If you do this, make sure you cover everything with towels - I covered the whole front end then found splashes of cutting compound on the windscreen and the rear plastic guards (which is a pain to get off again...) After cutting it back I hit it with some NuFinish to try and keep the surface unmarked for a while.

The end result is very pleasing, with it looking like new again! (the marks in the pic are actually a reflection of the palm tree in the garden and the guttering on the house!)

Good work looks new

[Von Depner]

Hi All I added a catch can to my JK since replacing the turbo hoses with Samco hoses.I hope this will reduce the oil into the system . So far its working fine fuel comsumption has gone from 13.5 to 12.3 so alls good. sorry about bad foto but took it with my phone

[taskmaster]

Broke the footman loop on the bonnet a while back. Made up a new one out of Kydex. Far stronger than the crappy plastic one. Now I can tighten my bonnet protector without fear of snapping it.

[phaqnhell]

I guess its what i'm going to do for the next few weeks



I'll do a separate thread once I get to the interesting parts

[brenttj]

nice mate what engine ??

[WHHEMI]

Originally Posted by king bogan

I guess its what i'm going to do for the next few weeks



I'll do a separate thread once I get to the interesting parts

I think that will keep you busy for more than a few weeks.