ARB BP-51 shocks

[Wazza D]

.......and do they clear the front chassis on articulation, or have they been relocated?

[warnabrother]

They will definitely need relocating.. my 5100's touch the chassis at full droop and are much skinnier than these

[Johnboy]

Nemesis relocation brackets cheap and effective get them from Northridge4x4 or similar. will fit 2.0, and larger style shocks. I needed them with 28" shocks as with that much droop the shocks bend like bananas against chassis rails

[mickkane]

There is a relocation kit supplied for the lower mount so there is no fowling on the chassis, I have checked all clearances and they don't come close to anything and even with 37's they will still not touch the tyre. I will get a photo of the bracket later on.

[chris0375]

Originally Posted by mickkane

There is a relocation kit supplied for the lower mount so there is no fowling on the chassis, I have checked all clearances and they don't come close to anything and even with 37's they will still not touch the tyre. I will get a photo of the bracket later on.

What width and wheel? Height isn't really the issue is it?

Sent from my D5503 using Tapatalk

[mickkane]

12.5 tyre on an AEV pintler +10mm offset with a 5.2" backspace, it would not come close to the shock regardless of wheel and tyre combo.

[Yom]

Originally Posted by mickkane

12.5 tyre on an AEV pintler +10mm offset with a 5.2" backspace, it would not come close to the shock regardless of wheel and tyre combo.

Reckon? You must be bumpstopped a bit more than 2" ?