Gidday,
I dont like rumours so I contacted arb in feb and again in march and these were the responses regarding the bullbar
thanks guys
Comments:
I own the latest jeep grand cherokee and would like to know if there are any plans for a steel bullbar for this vehicle or is there technical issues due to the radar sensing cruise control in the top of the range overland. I am holding off on an alloy bar purchase until I can find out if a steel one will be made I also understand that in the past the jeep has not been a big volume seller but it is currently one of the top selling vehicles so it would be interesting to know if there has been any research into the current market
thanks for your time
Laurie Hall
(2011 grand cherokee diesel)WK2 you for your enquire to ARB and your interest in our products.
From: Andrew Bellamy**
Sent: Thursday, February 09, 2012 8:14 AM
Subject: FW: Contact ARB
You are correct in saying demand is traditionally low for a Grand Cherokee. In the case of the WK ARB initially decided not to proceed with development, however have not reversed that decision.
The development project is likely to commence in the second quarter of this year. Unfortunately At this early stage I am unable to provide any insight into what the resulting product might look like, how technical challenges will be met, or give an in store ETA.
Kind regards
Andrew Bellamy
Andrew Bellamy
Product Manager
ARB Corporation Limited
42-44 Garden St Kilsyth, Vic 3137
Ph + 61 39761 6622
Fax + 61 39721 9096
abellamy@arb.com.au
:
www.arb.com.au
From: Laurie Hall**
Sent: Wednesday, 14 March 2012 11:02 AM
To: Andrew Bellamy
Subject: Re: Contact ARB
Gidday Andrew ,
Thankyou for your response to my question regarding the bullbar . Recently on one of the jeep forums I read that arb is now considering a bullbar for the wk2 can you confirm this or is it just a rumour?
Thanks again**Laurie Hall
Hi Laurie,
There will be a bar for this vehicle.
Currently there are many projects with the engineering department and as you can imagine time lines can be a little elastic with product development.
Initially we expected to start this project early this year, however it is more likely to be second quarter now. As it stands now, there is that there is a commitment develop a bar.
Regards.
Andrew Bellamy
Andrew Bellamy
Product Manager
ARB Corporation Limited
42-44 Garden St Kilsyth, Vic 3137
Ph + 61 39761 6622
Fax + 61 39721 9096
abellamy@arb.com.au
:
www.arb.com.au