What have you done to your JK this week? 2.5M Views

[JGB]

Originally Posted by Teo

Installed truck lite LED headlights. About $500 for both incl postage from US. Very impressed with light output so far just from first look.

Sent from my HTC_0P6B using Aussie Jeep Offroad mobile app

Are they from the US, for Australian cars? If not, your beam patterns will be all kinds of wrong, as far as I'm aware. I could be wrong though.

Anyone with more knowledge on it got a definite?

Otherwise for $500, I'll be in on that.

[drewinmanx]

Originally Posted by The Beard

Had a crack at making a Hardtop dolly, I'll test it in the morning - fingers crossed.

AH HA! I see you have the same plan set that I have. How did it all go, roof sits on ok, stable enough?

[Teo]

Originally Posted by JGB

Are they from the US, for Australian cars? If not, your beam patterns will be all kinds of wrong, as far as I'm aware. I could be wrong though.

Anyone with more knowledge on it got a definite?

Otherwise for $500, I'll be in on that.

I was told by truck lite that they are universal and not LHD/RHD. Then I asked on here and other members told me that's correct.

Sent from my HTC_0P6B using Aussie Jeep Offroad mobile app

[milky01]

Installed the DBOR urban kit over the weekend, really happy with the fit and quality of components. The Jeep looks just right on stockies with 1.75" of lift if you ask me

Only thing I'd like to sort out is the kit didn't come with brake line brackets or rear sway bar links/brackets.

Was there a little aluminium bracket you can get from bunnings to suit the front and rear that people have had success with?
Also would you say its better to use extended rear sway bar links or just get drop brackets?



Always helps to RTFM...

[MRGC]

Originally Posted by JGB

Are they from the US, for Australian cars? If not, your beam patterns will be all kinds of wrong, as far as I'm aware. I could be wrong though.



Anyone with more knowledge on it got a definite?



Otherwise for $500, I'll be in on that.

Try these guys.
http://www.northridge4x4.com/lightin...dapter-harness


, [____],
l----L -OlllllllO-
()_) ()_)-------)_)

[LeighP]

Truck Lites have a flat cut-off on the low beam, they are suitable for both LHD and RHD. The Aussie JK's are delivered with whats called Euro spec lights, these lights have a flat cut-off on the right side of the beam, and a slight kick forward of the light on the left side.
Lights that you can't use here are Euro spec LHD lights, as they throw light forwards on the right side.

Nice trolley, The Beard.....I've been meaning to knock one of them up....I want to throw the soft top on my JK for the first time.

[Hotdognz]

Originally Posted by TheoB

flexed mine into the panel at LCMP a while ago.

Jo and Theo wheel pretty hard though