Hello,
I went crazy and started sticking some metal together for my TJ Project.
Rear bar is high and fairly light weight, mainly made from recycled bits of 5mm + from bits of truck chassis and toolbox mounts etc and it is held on with 10 grade 10 bolts. The UHF coax cable is run through the bumper.
The number plate holder i made on the spare wheel is a 1/4 turn release with a deustch connector for the wiring. This was also made out of scrap metal (Except for the spring).
Here is my current progress.
Front flares and sill guards / side steps still to come.
Flare tubing is all 25nb heavy.
Enjoy, Sam