Reverse Light or Backup Light wiring in Trailer plug
I have an MY18 Trial Hawk WK2 and I am adding a wireless camera on a Tyre Trek rear bar that carries tyre, 20 Litres of Fuel and 20 litres of water. This is because the Tyre Trek will obscure the original camera.
I have a WIFI camera to mount and need the Reserve/backup light +12V to turn it on. The trailer socket has this and is called the Revering Light.
My issue is that I have that I tested the voltage on the trailer socket with the Jeep in reverse that should have turned it on, but this did not happen even thought the reverse lights were on. I have thought of connecting the camera to the reverse lights but that is a lot more difficult to do than using the trailer plug.
Any thoughts on this? Is there something that has to be turned on to make it work?
What do you think?
Best regards, Adrian.
__________________
Regards, Goneagain. It's somewhere around here ...
WH2 2018 Trailhawk
WJ 2001 Laredo
ZJ 1998
Last edited by Goneagain; 25-08-2019 at 05:31 PM.
|