KJ lifts and what to expect

[Jeep KJ]

I used TJM and am very happy with them. I did replace all of the shackles both front and back too. Upper control arms were complete kits. That made all the difference and brought everything into alignment. I may have gone too big with tyres as the one rubs at some angles.

Sent from my SM-G930F using Tapatalk

[ConorD]

Hey guys,

Bought my jeep less than a week ago! And I'm wondering after all this time how everyone is going with their various lift combos? As I've found my springs have sagged a bit over time

I think I'm gonna go with a OME Lift from JeepinByAl or a

Heavy duty TJM kit

I do need the heavier rated front springs because because I bought it with an ARB bullbar already fitted.

I want to keep it fairly standard in terms of just fitting the suspension lift and NOT spacers etc.

Cheers,
Conor

Sent from my SM-G950F using Tapatalk

[Fouros]

You don't have to buy an OME kit from Jeepin by Al just get one locally

Sent from my F8331 using Tapatalk

[Lancer]

Or go to CRDStu (Stu Murchison)

[a-frame81]

I'm still really happy with the EFS lift I got. Seems to be holding up and hasn't dropped at all since I had it installed. New tyres coming up soon, where I'll go to 245/70r16's. Haven't decided which ones yet.

Have to get the T/C issue sorted first, but it's behaving itself at the moment again which makes it hard to pinpoint what's causing the issue.

[Jeep KJ]

Originally Posted by a-frame81

I'm still really happy with the EFS lift I got. Seems to be holding up and hasn't dropped at all since I had it installed. New tyres coming up soon, where I'll go to 245/70r16's. Haven't decided which ones yet.

Have to get the T/C issue sorted first, but it's behaving itself at the moment again which makes it hard to pinpoint what's causing the issue.

Hi a-frame.
I am not sure whether you are referring to the torque converter when you mentioned t/c? If so, I had issues which were t/c related. It turns out that the gearbox service had seen the garage underfill the box by at least 1litre😯. Topped that up and that was done! The fluid levels didn't register on the dip stick as being low. Air bubble in the t/c? Not a mechanic. I have a brand new Mopar t/c in the garage that I didn't need to fit if you would like to buy that a greatly reduced price.👌

Sent from my SM-G930F using Tapatalk

[ConorD]

Yeah I've seen the EFS kit, would it hold the weight of the KJ engine and a bullbar?

Sent from my SM-G950F using Tapatalk