REVIEW: Runva 11XP Winch - Page 4 - AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand

Go Back   AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand > PORTAL > REVIEWS & NEW PRODUCTS
Register Forums Trading Your Jeep New Garage Mark All Read

Post New Thread  Reply
 
Thread Tools Search this Thread
  #22  
Old 24-07-2014
Dissociative  Dissociative is offline
Established Member
 
Join Date: Jul 2013
Location: Perth
Posts: 228
What Jeep do I drive?: KJ
Likes: 4
Liked 12 Times in 9 Posts
Default

Same issue as Jimmy, the ARB bars are designed for roller fairleads, which are held in place by 4 bolts that go straight through the bar to the holes that hold the winch to the bar. The hawse fairleads have 2 bolts that sit in the middle that would hit the winch if you drilled new holes in the bar.

The alternative would be to fab up a bracket as Jimmy did, which IMO looks much cleaner.
__________________
2006 65th KJ Cherokee CRD, CRDSTU lift, General Grabber 31's, ARB Bar, Runva Winch, Mopar Skids
  #23  
Old 24-07-2014
chris0375's Avatar
chris0375  chris0375 is offline
Lowranger Shocker
 
Join Date: Aug 2012
Location: Melbourne
Posts: 1,711
What Jeep do I drive?: JK
Likes: 401
Liked 404 Times in 293 Posts
Default

Or offset fairlead?
__________________
2008 2 Door JK CRD auto
  #24  
Old 25-07-2014
Kiwi Jeeper's Avatar
Kiwi Jeeper  Kiwi Jeeper is offline
Lowranger Shocker
 
Join Date: May 2006
Location: Auckland, NZ
Posts: 1,538
What Jeep do I drive?: JK
Likes: 11
Liked 116 Times in 94 Posts
Default

Grade 5 is for SAE and 8.8 is for metric. Same thing. Grade 5 bolts are fine. No need to spend money unnecessarily.
__________________
'12 JK Rubicon V6 3.6L
'15 KL Trailhawk V6 3.2L
  #25  
Old 25-07-2014
kj69's Avatar
kj69  kj69 is offline
No Winching
 
Join Date: Oct 2005
Posts: 2,528
What Jeep do I drive?: XJ
Likes: 97
Liked 121 Times in 64 Posts
Default

Possible way to fix the problem with the hawse bolts hitting the winch is to drill and countersink the 2 holes for the hawse from the inside of the bar and use countersunk allen head bolts and fit your hawse before the winch, in my case i have 10 mm thick steel that i had tapped to fit my hawse.
__________________

Help support the future of the forum
  #26  
Old 06-11-2014
Jimmyb's Avatar
Jimmyb  Jimmyb is offline
Head Honcho
 
Join Date: Jul 2002
Location: Australia
Posts: 12,760
What Jeep do I drive?: XJ
Likes: 1,060
Liked 1,173 Times in 708 Posts
Check out my Ride(s)
Default

Quote:
Originally Posted by Dissociative View Post
Same issue as Jimmy, the ARB bars are designed for roller fairleads, which are held in place by 4 bolts that go straight through the bar to the holes that hold the winch to the bar. The hawse fairleads have 2 bolts that sit in the middle that would hit the winch if you drilled new holes in the bar.

The alternative would be to fab up a bracket as Jimmy did, which IMO looks much cleaner.
The adapter you have used does look neat though, although as you say welding the studs in sits everything back a tad cleaner.
__________________

www.ausjeepoffroad.com
  #27  
Old 12-01-2015
Jeepboy79's Avatar
Jeepboy79  Jeepboy79 is offline
CrawlerStar
 
Join Date: Nov 2013
Posts: 342
What Jeep do I drive?: KJ
Likes: 10
Liked 17 Times in 15 Posts
Default

Quote:
Originally Posted by Dissociative View Post
Here is a pic, it's the bottom 2 bolts that are a bit short due to the added space taken by the fairlead adaptor (the fairlead itself screws into the top holes you can see)

Hey all, I have the same bar as Dissociative, (ARB) and I'm also going to pick up one of these winches. I just have a couple of questions, hoping people from this thread can assist, even though it goes back a little while.

1) Do I have to take the bar off to mount the winch? (probably yes)
2) If I use the standard roller style fairlead, will this just slot in? I don't want to drill any holes in the bar if I can avoid it and I don't have a problem with the way the roller fairleads look.
3) Is the cabling/wiring incredibly complicated? How would you rate on a scale of 1-10, 10 being "do NOT try this at home".
__________________


It's a KJ thing!
KJ Cherokee 65th Anniversary Edition
  #28  
Old 13-01-2015
LeighP's Avatar
LeighP  LeighP is offline
Lowranger Shocker
 
Join Date: Mar 2014
Location: Macarthur Region, SW Sydney
Posts: 1,683
What Jeep do I drive?: JK
Likes: 1,053
Liked 584 Times in 369 Posts
Default

Rope doesn't really work with roller fairleads......so if you want the rollers, order the winch with cable.
Wiring isn't difficult, the annoying part I found was the cabling was "just" that much too short if running direct to the battery (given a JK's battery location). Mine worked out OK as I've added a solenoid on the power cable under the hood.
Post New Thread  Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On





All times are GMT +10. The time now is 06:47 PM.


Advertisements




AJOR does not vouch for or warrant the accuracy, completeness or usefulness of any message, and are not responsible for the contents of any message. The messages express the views of the author of the message, not necessarily the views of AJOR or any entity associated with AJOR, nor should any advice be substituted as technical advice replacing that of a mechanic. You agree, through your use of this service, that you will not use AJOR to post any material which is knowingly false and/or defamatory, inaccurate, abusive, vulgar, hateful, harassing, obscene, profane, sexually oriented, threatening, invasive of a person's privacy, religious, political or otherwise violative of any law. You agree not to post any copyrighted material unless the copyright is owned by you or by AJOR. The owner, administrators and moderators of AJOR reserve the right to delete any message or members for any or no reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold harmless AJOR, the administrators, moderators, and their agents with respect to any claim based upon transmission of your message(s). The use of profile signatures to intentionally mislead or misdirect any member on this forum is not acceptable and may result in your account being suspended. Any trip that is organised through the AJOR forum is participated at your own risk. If you or your vehicle is damaged it is your responsibility, not that of the person that posted the thread, message or topic initiating the trip, nor the organisers of AJOR or moderators of any specific forum. This forum and associated website is the property of AJOR. No user data is harvested and no information supplied in your registration will be sold for profit.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

AJOR © 2002 - 2024 AUSJEEPOFFROAD.COM. All corporate trademarked names and logos are property of their respective owners. Ausjeepoffroad is in no way associated with DaimlerChrysler Corporation or Fiat Jeep.
www.ausjeep.com www.ausjeep.com.au www.midlifemate.com ausjeepforum.com www.r9kustoms.com
vB Ad Management by =RedTyger=