Custom Bash Plates for a WH!

[WH3.0]

Originally Posted by Clarky

Which thread/size Fuimoto

Its the F106 Clarky 14mm - 1.5, heres a link to their site,it worked out cheaper to buy it direct from them. it also has locking clips an nipples to connect a hose etc.
http://fumoto.com.au/sizes.php

[Heifer Boy]

Originally Posted by WHHEMI

Just got back from having the grand measured up for the plates, the small front plate to protect the wiring loom and the PS hoses will be slotted for air flow, there will then be a engine plate and a seperate trans plate as well, need to wait for laser cutting and bending before a trail fit in a couple of weeks, I will try and get some pics and update this then.

Excellent. I heard from Karen and she said the plates will be pretty simple which is great news. Hopefully your mounting points are the same as my CRD but I don't know how to confirm that.

I can't remember if you have a bar or not or is the front plate attaching to the front sill of the Jeep? How come you are getting new plates if you have the Muchison ones?

HB

Sent from my XT1635-02 using Tapatalk

[Heifer Boy]

Originally Posted by Clarky

Which thread/size Fuimoto

Sorry Clarky. I missed this.

I actually have an EZ Oil Drain plug. The F106. Same as the Fumoto really. I bought the short straight nipple adapter and use a length of clear hose to drain the oil. Really simple and clean to use.
http://oildrainvalves.com/fumoto-vs-ez.html

HB



Sent from my XT1635-02 using Tapatalk

[WHHEMI]

Originally Posted by Heifer Boy

Excellent. I heard from Karen and she said the plates will be pretty simple which is great news. Hopefully your mounting points are the same as my CRD but I don't know how to confirm that.

I can't remember if you have a bar or not or is the front plate attaching to the front sill of the Jeep? How come you are getting new plates if you have the Muchison ones?

HB

Sent from my XT1635-02 using Tapatalk

Yes I have an ARB front bar, the mounting points should be identical for all WH's, but obviously I can't say they will fit, I don't have the murchison plates apart from the one with louvers that replaces the standard ARB one.

[Heifer Boy]

Originally Posted by WHHEMI

Yes I have an ARB front bar, the mounting points should be identical for all WH's, but obviously I can't say they will fit, I don't have the murchison plates apart from the one with louvers that replaces the standard ARB one.

So the PS hose plate with the slots will attach to the Jeep at the front where the air dam is usually attached or will it attach to the bottom of your bar?

Sorry I can't visualise under an ARB bar compared to no bar and don't know if they cut away any of the front of a Jeep to fit one.

HB

Sent from my XT1635-02 using Tapatalk

[WHHEMI]

Originally Posted by Heifer Boy

So the PS hose plate with the slots will attach to the Jeep at the front where the air dam is usually attached or will it attach to the bottom of your bar?

Sorry I can't visualise under an ARB bar compared to no bar and don't know if they cut away any of the front of a Jeep to fit one.

HB

Sent from my XT1635-02 using Tapatalk

Nothing is cut away to fit the ARB bar, and the PS plate is fitted to the small cross brace thats under the radiator area, same place the rear of the ARB skid mounts.

[Heifer Boy]

Originally Posted by WHHEMI

Nothing is cut away to fit the ARB bar, and the PS plate is fitted to the small cross brace thats under the radiator area, same place the rear of the ARB scid mounts.

I've just had roll around under the Jeep and got the picture in my head of the mounting points again. All looks simple so I'm looking forward to seeing what you get in a couple of weeks time [emoji106]

HB

Sent from my XT1635-02 using Tapatalk