Quote:
Originally Posted by Rekloss
1997 jeep XJ 2.5tdi
If I turn the ignition off completely it comes back on and has all the power it should but after 5 mins of driving it goes back to the 2k limp mode. Could it be the injector 1 sensor (thought this would be from start up)
Thanks in advance.
|
Maybe when it warms up the wire coil in the sensor becomes open. Have you tested the sensor while its still hot?
You could keep the engine running & unplug & test the sensor resistance while the engine is running.
__________________
98&01XJVMs,06&07KJCRD's,No longer question authority,I annoy it.More effect,less effort.10000Club
|