Fuse Diagram 1996 xj sport

[junglejuice]

Originally Posted by Wally3218

There are so many different diagrams for the fuses on a 1996 XJ jeep cherokee
This is a photo I've taken of my fuses even the location numbers are backwards which is really weird
Can anyone help with the fuse items they control.
Ive checked out a few other sites but the fuses are in different locations.


This is a photo of one that nearly matches mine except for the circuit breakers.

Which one is yours?

[rustynuts]

Originally Posted by Wally3218

Thanks rainman this looks much better than the one that was supplied by jeep when the jeep was bought.
Plus the build date is Oct 95 stamped on a brass plate in the engine bay firewall.
XJ 1996 Jeep Cherokee Sport have to use both fsm 1995 and 1997 to work on the jeep.

I find the plate in the engine bay to be a bit misleading. Mine says Oct 98.
Mine has a sticker inside the passenger door that states it was built Feb 98.
If you have that sticker it may help with your exact date of birth.

[Wally3218]

The first photo is of mine.
The build date plate in the engine bay is stamped Oct 95 and the sticker says date of manufacture 10-95
I'm going to pull each fuse out and see what doesn't work then compare with the fsm


Sent from my iPad using Tapatalk

[junglejuice]

Originally Posted by Wally3218

The first photo is of mine.
The build date plate in the engine bay is stamped Oct 98 and the sticker says date of manufacture 10-95
I'm going to pull each fuse out and see what doesn't work then compare with the fsm


Sent from my iPad using Tapatalk

That fuese box is from a pre-update, so definitely not a 98....

[Wally3218]

Originally Posted by junglejuice

That fuese box is from a pre-update, so definitely not a 98....

My fat fingers hit the 8 key instead of the 5 should of been 10-85 have edited my post thanks


Sent from my iPad using Tapatalk

[junglejuice]

This is mine from a 97 OBD2 pre-update....

[Wally3218]

Very similar to mine junglejuice except for silver circuit breakers,
The numbers on my fuse block are all mixed up which is a pain and look like they have been re stamped.


Sent from my iPad using Tapatalk