Anyone running sunraysia steel wheels

[Hanna]

Originally Posted by ren0vator

Yep 20mm for the offset & 6.5mm for the rim,
but it also depends on backspacing.

Be interesting to see the final result
Driving round corners about to become interesting
Luckily there's not many corners up north

I have already test-fitted them and they are surprisingly OK. The driver's side rubs on the inner splash guard at the rear of the front wheel well during turns, but that's only because the rear A/C lines run there and I can't pull the plastic back any further. I have done the pinch weld mod on both sides for the extra clearance, so if it wasn't for the A/C lines it would be sweet. I can see why the hard-wheeling guys in the States remove the rear A/C now.

I do have about 3.25" of lift in the front though with the Murchison strut spacers. I reckon if I was at a true 2" lift it would be scraping a lot worse!

[grandpa_spec]

Ah perfect

[Turismo07]

My brother has 17x9 0 offset and 265/70R17 tyres on his Commander with 2" King springs. Pinch seam bashed back.

This pic is with bald AT's, has since fitted new MT's in the same size. No issues.