If the housings are identical shape and size, then yes, the covers could just look the same as they could be the same manufacturer.
Google "tj diffs" and go to images. It'll take 2 minutes to confirm.
Also you might need to check your diff gearing is correct for 35's. If i remember correctly you should have 4:11 or 4:56.
Unfortunately you can't just bolt on 35's and off you go.
Your speedo would also be out, have you checked actual speed with a GPS, compared to speedo reading??
There is a calculator on here somewhere, posted by Seacomms I think, that gives diff gear to speed ratios in all gears. Try the search function on this forum. I'm on my phone so I'm not savvy enough to post the link, makes me feel really old writing that last bit ��
Good luck and let us know what you find.
Sent from my SM-G900I using Aussie Jeep Offroad mobile app
__________________
08 JK CRD
Locked F+R, 2 1/2" 33's
AEV F+R bars
"Dr. says I need a backiotomy!"
Last edited by Jimmyb; 21-02-2018 at 11:34 AM.
|
Is this a Dana 44 in front of my TJ
