Gidday Dunworkin. Wish I was too. Almost but not yet!
They did work for a while but some worked loose on the many corrugations and dips/bumps and I've got to reinstall them.
Basically, in the OEM bumper, the sensors fit into a special bracket that fits into slots cast into the back of the plastic bumper. The bullbar doesn't have these slots so the sensors were originally reattached with double sided tape.
Of the 6 front sensors, I think about 3 are still attached this way with 3 being on by bench in the workshop.
I intend to attach them all with Sikaflex, which is treacherous stuff, but once applied, they won't come loose.
The front bullbar makes judging clearances on the front quite easy. I'd happily live without them. However, with sensors missing, I have to turn the "parking sensors" off inside, which also takes off the rear sensors, which would be a handy safety precaution.
Bandicoot
__________________
Bandicoot
If you come to a fork in the road, take it
VKS-737 Quebec 959 or Iridium 0147 142 062
|