Looking for rear driveshaft, jeep xj

[HamishW96]

Hey all looking for a driveshaft for my 4.0l auto XJ with NO DINTS in it lol. If anyone has one laying around and wants to part with it I'm happy to come get it or pay for shipping to get it. Thanks, Hamish.

[LuluBelle]

jeep wreckers
_____ooooo
/__l_l_,\____\,___
l_---l_l__l---[ ]llllll[ ]
_.(o)_)__(o)_)--o-)_)

[Classic Boy]

DIY parts in Camp rd always has a few jeeps, but sometimes tail shafts can be hit and miss as they move wrecks around on forklifts.

[BLAKLISTED]

Hey mate I have one with a slip yoke laying dormant under my house, no use for it as I have a sye now. you can have it if you pay postage. From a 96 xj, just checked the uni's they feel pretty good too.

[HamishW96]

Originally Posted by BLAKLISTED

Hey mate I have one with a slip yoke laying dormant under my house, no use for it as I have a sye now. you can have it if you pay postage. From a 96 xj, just checked the uni's they feel pretty good too.

Hey mate I'll take your offer up on that! Thanks so much! Didn't have any vibes when you had it in the car? My shaft is a bit sad considering it's been jacked up on the shaft... Feel free to PM me or text me on zero455 two38 57four about it, and what shipping with e-go (I've used them heaps) or similar would be. Cheers, Hamish.

[HamishW96]

Originally Posted by LuluBelle

jeep wreckers
_____ooooo
/__l_l_,\____\,___
l_---l_l__l---[ ]llllll[ ]
_.(o)_)__(o)_)--o-)_)

Originally Posted by Classic Boy

DIY parts in Camp rd always has a few jeeps, but sometimes tail shafts can be hit and miss as they move wrecks around on forklifts.

The one xj they had had a bent shaft as the forklift killed it and then it went to jeep heaven as it is gone now.

[BLAKLISTED]

It was fine when it was in the car, but it's been unused for 3 or 4 years now. Little bit rusty but nothing a wire brush couldn't fix.