TJ: Tonka Jeep - 2005 Renegade Extreme Sport

[Tonka Jeep]

Originally Posted by geocrawler

Thanks Tonka Jeep. I'll look in to it. Just need a JJ with 7/8" left hand thread to replace the current TRE.

I know they have one of those.

[Tonka Jeep]

Happened to score a new free complete HP Dana 30. The fact I have it sitting in my shed means the decision as to what to upgrade the factory LP 30 was pretty simple.

This is going to have Artec truss and gussets added along with Artec HD lower control arm brackets. Chromo axles will also be added.
The brand new 4.11 gears in it will have to come out and new spicer 4.56 gears will go in.

Was going to put a locker in but it looks like the rear ARB is terminal so extra funds will go into a new e-locker for the rear and I may have to chuck the Detroit true-track back in the front for now.

[Tonka Jeep]

[Tonka Jeep]

Rear Air Locker has been replaced with a Harrop E-Locker.

Tested the new front end with the 35x11.5 Centipedes with internal bead locks.

All went really really well, so well infact, the winch rope didn't get run all day on a few tracks I have always had to in the past.

[Tonka Jeep]

Build List June 2015

- 3in Terraflex coils
- Terraflex Hydro Bump Stops front and rear
- Fox 2.0 Shocks
- Rear shock relocation brackets
- Custom heavy duty track bar with Currie Johnny Joint
- Heavy duty Tie Rod
- Black Jack Welding steering stablizer relocation bracket
- Rubicon Express steering stabilizer
- Dana 30 HP front end with Artec truss, gussets and control arm brackets
- Dana 30 external axle seals
- Rear trackbar drop bracket
- Custom front and rear driveshafts
- Extended Brake lines
- Rear Disc Brake conversion
- Rubicon Express adjustable upper control arms front and rear
- Rancho Rock Crawler lower control arms front and rear
- Terraflex Super Short SYE
- Terraflex Belly-up skid plate
- Custom G&J drive shafts front and rear
- 35"x12.5” Maxxis Treppadors Radial (Road)
- Pro-Comp Series 51 Rockcrawler steel rims 15x8” -3.75BS
- 35"x11.5 Simex Centipedes (Off-road)
- Dynamic Soft 8 steel rims 15x8" -3.5BS with second air internal beadlocks
- MOAB 7" extended flares
- AEV Heat Reduction Hood
- JBits modified rear bar/tyre carrier with jerry can mounts
- ARB Body Mounted Sliders
- Detroit TrueTrac Front Locker
- Harrop E-Locker Rear Locker
- ARB Compressor
- 4.56 Diff Ratios
- GME 3400 UHF Radio
- Snake Racing steering box guard
- Rigid Dually D2 driving lights and A pillar mounts
- LED Unlimited Australia 50" light bar
- Custom front bar, cut down warn rock crawler bar.
- Warn winch plate
- Modified Warn High Mount Winch with 50m Amsteel rope
- In-cab winch switch
- Safari Snorkel
- Rear seats removed and custom rear folding shelf
- JKS swaybar disconnects
- 2.5" exhaust
- JKS 1" body lift
- Scan Gauge with Blendmount (mounted above rear vision mirror)
- Pioneer CD Player with Kenwood speakers

[Tonka Jeep]

[Richo]

You still wheeling Ed?