G'day Zappa,
If you use a pipe slide hammer, just make sure the business end is cut square or the bearing may get askew...
For diff lube, mine is from Supercheap.
Penrite Pro Gear 80W140 full synthetic (full syn lasts longer).
Alternative is Nulon 80W140 Full Synthetic.
You will find that there is no gasket under the diff cover.
You can get aftermarket gaskets:
• Crown: J8120360
• Lube Locker: LLR-R21-D030
• Felpro: RDS 55019
But standard practice is just thoroughly seal it with Blue Maxx or similar.
Keep in mind your housing is aluminium, take care when cleaning the old sealant off.
Bolt torques are 2 stage: 15 then 35 ft-lb
__________________
'04 WG 2.7 CRD
Last edited by MuzzaWA; 19-07-2022 at 01:36 AM.
Reason: Revised gasket part numbers plus torques added
|