Ok , gents , just to add up to the info pile here , first of all FK JEEP for this proprietary bs.
My 03 2.7 WJ had a leak on top of the power steering pump , at the inner O ring of the fitting ... well after some research i realized that the power steering lines look almost exactly the same for the V8 (01-04) WJ and the 2.7CRD , so i bought the Edelmann 92189 with the updated fittings (just ONE O ring mounted on the outside ) from ebay USA for 46$ ... i thought that bend at the pump would be too high and hit the IC hose so i bent it a bit ( the elbow flattened a bit but it's ok ) and pulled it towards the rad so it will not contact the hose , just by very little using "brute force" ( put the wrapped in tape end into the the end of the jack handle and pulled/pushed on it ) . well it would have worked out with less of the brute force bending
))
here it is :
the "kink" / flattened area s not as bad as it looks in this pic because of the lighting :