What have you done to your JK this week? 2.5M Views

[The walrus]

Hi Blue Fin

I used Senson grease which is just an electrical grease similar and cheaper would be available from Jaycar or Dick Smiths and Denso Tape which is a greased cloth tape and great for sealing pretty much anything against moisture it available from Blackwoods and only around $10 a roll

I unpluged the connector to the motor and covered the pins withe the senson grease I also filled the shell of the plug with the grease and also the conduit that covers the wiring plugged it back in and coved the lot with the Denso tape and "smeared" the tape onto the housing and to itself so there were no voids

Denso tape is a great product easy (but messy) to use and just as easy to remove

I made a rubber boot using some rubber tube and locktite rubber glue but I wasnt happy with it and the Denso does a better job anyway

Cheers
Craig

[sladey]

Originally Posted by kam

They will stick out around 3.5-4cm out of standard flares. Aren't the bushwacker flatties same wide as stock?

cheers, yea, on further investigation they seem to be the same width.. might have to look at others

[NLJeep]

Finally got time to assemble the new to be rock-sliders over the last weekend.
There on now, but will add a side step to them over the coming weekends.

Anyone knows a good powder coater that can also sandblast the sliders in Perth Area ?

[MRGC]

Installed the dominian tailgate holder and the teraflex hinged tyre carrier over the weekend.

[walldog]

Half doors and tops fully sorted

[drewinmanx]

Originally Posted by walldog

Half doors and tops fully sorted

Nice one!! They look like Mopar ones too!!?!!

How much and where'd you get them?

[Jakstas]

Dropped the auto tranny out yesterday, have to put a new one back in today. Lol