What did you do to your WH/XH today? - Page 97 - AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand

Go Back   AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand > JEEP GARAGE > XH Commander and WH Grand Cherokee
Register Forums Trading Your Jeep My Garage Mark All Read

Post New Thread  Reply
 
Thread Tools Search this Thread
  #673  
Old 25-09-2017
Windex's Avatar
Windex  Windex is offline
Full Flexer
 
Join Date: Oct 2008
Location: Gippsland Vic
Posts: 1,110
What Jeep do I drive?: WH
Likes: 11
Liked 98 Times in 67 Posts
Default

Well got into my spark plugs today, all 16 of the buggers!! Few skinned knuckles but done none the less. Found my air temp sensor wasn't the right one (lacked the locking tabs). Weekend was productive with the PCV, EGR and MAP all replaced... Never managed to get the plug off my oil pressure sensor though!

Ohhhh of course my lift kit arrived when I was half way through the plugs... so that's a job for a future weekend.
  #674  
Old 28-09-2017
slippery  slippery is offline
Established Member
 
Join Date: Oct 2010
Posts: 119
Likes: 18
Liked 39 Times in 29 Posts
Default

Quote:
Originally Posted by Windex View Post
Well got into my spark plugs today, all 16 of the buggers!! Few skinned knuckles but done none the less. Found my air temp sensor wasn't the right one (lacked the locking tabs). Weekend was productive with the PCV, EGR and MAP all replaced... Never managed to get the plug off my oil pressure sensor though!

Ohhhh of course my lift kit arrived when I was half way through the plugs... so that's a job for a future weekend.
have you noticed any change with the PCV, EGR and MAP replacements?
Likes: (1)
  #675  
Old 28-09-2017
slippery  slippery is offline
Established Member
 
Join Date: Oct 2010
Posts: 119
Likes: 18
Liked 39 Times in 29 Posts
Default





After being annoyed at not being able to open my fridge top in the back of the grand, I decided to do something about it!
Took the plastic crap out of the rear and replaced it with mdf. Bought some drawer runners and built a fridge slide to sit on top of the mdf. Underneath the slide can be used as storage
Whatchyall think?
Likes: (4)
  #676  
Old 29-09-2017
WH3.0's Avatar
WH3.0  WH3.0 is offline
Established Member
 
Join Date: Sep 2016
Location: Port Lincoln, SA
Posts: 189
What Jeep do I drive?: WH
Likes: 168
Liked 48 Times in 32 Posts
Check out my Ride(s)
Default

Quote:
Originally Posted by slippery View Post




After being annoyed at not being able to open my fridge top in the back of the grand, I decided to do something about it!
Took the plastic crap out of the rear and replaced it with mdf. Bought some drawer runners and built a fridge slide to sit on top of the mdf. Underneath the slide can be used as storage
Whatchyall think?
Look awesome mate.
What did you do about winding the spare tyre down ? i think i can see a bit of a cut in the carpet is that it ?
its surprising how much room you gained by removing the original floor. HMMMMM
  #677  
Old 30-09-2017
slippery  slippery is offline
Established Member
 
Join Date: Oct 2010
Posts: 119
Likes: 18
Liked 39 Times in 29 Posts
Default

Quote:
Originally Posted by WH3.0 View Post
Look awesome mate.
What did you do about winding the spare tyre down ? i think i can see a bit of a cut in the carpet is that it ?
its surprising how much room you gained by removing the original floor. HMMMMM
Thanks dude!

I cut a 25mm hole in the MDF and just sliced an 'X' with a carpet trimmer into the carpet to be able to access the spare tyre winder. Works a treat
Likes: (1)
  #678  
Old 30-09-2017
Windex's Avatar
Windex  Windex is offline
Full Flexer
 
Join Date: Oct 2008
Location: Gippsland Vic
Posts: 1,110
What Jeep do I drive?: WH
Likes: 11
Liked 98 Times in 67 Posts
Default

Quote:
Originally Posted by slippery View Post
have you noticed any change with the PCV, EGR and MAP replacements?
Have not driven it much but it does seem smoother, the PCV was still moving so probably could have stayed, the MAP and EGR had given me codes recently so I put them in, pretty sure neither of them had been replaced as the MAP still had the plastic tabs on it that you need to remove to install a new one.
  #679  
Old 18-10-2017
Clarky's Avatar
Clarky  Clarky is offline
Irok Bandit
 
Join Date: Apr 2012
Location: Wang NSW
Age: 56
Posts: 4,432
What Jeep do I drive?: JT
Likes: 479
Liked 1,190 Times in 789 Posts
Check out my Ride(s)
Default Gear Knob and switch install

2007 JEEP COMPASS GEAR SHIFT KNOB and OTRATTW switch install


Attached Thumbnails
Click image for larger version

Name:	20171018_195552.jpg
Views:	409
Size:	31.6 KB
ID:	76517   Click image for larger version

Name:	20171018_195323.jpg
Views:	189
Size:	10.4 KB
ID:	76518   Click image for larger version

Name:	20171018_195423.jpg
Views:	190
Size:	9.3 KB
ID:	76519   Click image for larger version

Name:	20171018_195510.jpg
Views:	419
Size:	11.6 KB
ID:	76520   Click image for larger version

Name:	20171018_195610.jpg
Views:	237
Size:	31.6 KB
ID:	76521  

__________________
SOLD 06 Limited G/C QuadraDrive II Lovells 2"Lift +30 rims 265/70/17 Imported Saguaro Bar Stedi
Likes: (6)
Post New Thread  Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On





All times are GMT +10. The time now is 03:24 PM.


Advertisements




AJOR does not vouch for or warrant the accuracy, completeness or usefulness of any message, and are not responsible for the contents of any message. The messages express the views of the author of the message, not necessarily the views of AJOR or any entity associated with AJOR, nor should any advice be substituted as technical advice replacing that of a mechanic. You agree, through your use of this service, that you will not use AJOR to post any material which is knowingly false and/or defamatory, inaccurate, abusive, vulgar, hateful, harassing, obscene, profane, sexually oriented, threatening, invasive of a person's privacy, religious, political or otherwise violative of any law. You agree not to post any copyrighted material unless the copyright is owned by you or by AJOR. The owner, administrators and moderators of AJOR reserve the right to delete any message or members for any or no reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold harmless AJOR, the administrators, moderators, and their agents with respect to any claim based upon transmission of your message(s). The use of profile signatures to intentionally mislead or misdirect any member on this forum is not acceptable and may result in your account being suspended. Any trip that is organised through the AJOR forum is participated at your own risk. If you or your vehicle is damaged it is your responsibility, not that of the person that posted the thread, message or topic initiating the trip, nor the organisers of AJOR or moderators of any specific forum. This forum and associated website is the property of AJOR. No user data is harvested and no information supplied in your registration will be sold for profit.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

AJOR © 2002 - 2024 AUSJEEPOFFROAD.COM. All corporate trademarked names and logos are property of their respective owners. Ausjeepoffroad is in no way associated with DaimlerChrysler Corporation or Fiat Jeep.
www.ausjeep.com www.ausjeep.com.au www.midlifemate.com ausjeepforum.com www.r9kustoms.com
vB Ad Management by =RedTyger=