Quote:
Originally Posted by Thol
Re your first calculation, going from 32" to 33" is only lifting 1/2" or about 12mm.
With a 2" suspension lift you'd be left with 1" radius increase or 2" diameter to stay within the 75mm overall.
|
Hey Thol,
You are correct. I would end up with a 2.25 inch lift rather than 2.5.
But i was advised that the lift may be a little bit over the rated 2 inch so i'm playing it safe.
***EDIT*** Sorry i double checked and gave you all a bum steer. I'm getting a 2.5 inch lift.. which should end up just shy of 3 inch with 33's.
***EDIT 2*** Sorry tripled checked. It's a 2 inch lift i am having done... you can't legally do more than 2 inch suspension lift. But i could go a a little higher on the tyres if i wanted to, closer to 34 inch.