Aftermarket parts

[philipleaw]

Thanks for the useful info.
My KJ threw the idler pulley 6m ago, and apparently the RAC guy used a Holden part to replace. SO its was only $180 all in. Then this w/e the pulley tensioner threw itself on the highway. Not sure if the fact that 2 pulley wheels with simple bearings in have gone (Only done 64,000 km) is pointing towards something else. Any ideas?

BTW
Also discovered a nice set of 15" Wheels that fit the KJ, didnt know 15' fitted, but it opens up the options.

[Pipeliner]

Cmohr's been running 15's for some time now - they look good.

[nudge 22]

Does anyone know the specs for the manual gearbox oil the manual says to use mopar oil or equivalent but it doesn't say what grade or anything

Cheers

[loric]

I recall that it's an automatic transmission weight oil, but designed for manuals... Like 10W-30? Not the regular 75W-90 manual oils.

Find one that meets the MS-9224 spec.
e.g.
https://www.amsoil.com/storefront/mtf.aspx?zo=1468345

This one's 5W-30, but my gut feeling was that the MOPAR fluid was 10W-30...

[reggie426]

2002-2007 3.7L Air Filter from Repco

Ryco p/n A1545 $43.99rrp

might be cheaper OE unless you get discounts. I paid $33.

I picked up a Radiator to suit the 2002 3.7L for $440 delivered from an eBay store
http://stores.shop.ebay.com.au/RADIA...34Q2ec0Q2em322

Does anyone know where I can get an aftermarket Coolant Resevoir bottle from? Mechanic is trying the Dealer on Monday, but any other suggestions would be appreciated.

[nudge 22]

Ryco do a fuel filter fo the 2.5 KJ part no Z625 cost is $156 from Repco
Jeep one is $87 not much point getting the ryco unless you cant get a Jeep one,
Im not sure on the spec of the Ryco I know the early KJ fuel filters are 2 micron and apparently the later KJ's are 10 Micron

[KJ_andy]

For something different in high kj lifts check out this
http://www.abt4x4.com/EzyCat2646__34...wler%20KJ.html