I'm looking at making a few knuckles for friends and would like to no if any one out the is interested in one. These knuckles work on TJ and XJ, the photo's are off my car witch has a triangulated front suspension witch is why i made it to fix bump steer but this can all so be used with a pan-hard rod set up. They will cost about $1500 each that will not include any of the think arms. The knuckle is made from 4130 grade steel.
I'm very interested, 1500 is way too much though. Does the knuckle take 1 tonne TRE's?
yes it does take 1 tone tre's, most of the cost go's into the steel cost you can use a lesser grade steel but you will have to get an engineer to sign of on the disign chang witch my save a few hundred on steel cost but not egineers cost.
AJOR does not vouch for or warrant the accuracy, completeness
or usefulness of any message, and are not responsible for the contents of any
message. The messages express the views of the author of the message, not necessarily
the views of AJOR or any entity associated with AJOR, nor should any advice
be substituted as technical advice replacing that of a mechanic. You agree,
through your use of this service, that you will not use AJOR to post any material
which is knowingly false and/or defamatory, inaccurate, abusive, vulgar, hateful,
harassing, obscene, profane, sexually oriented, threatening, invasive of a person's
privacy, religious, political or otherwise violative of any law. You agree not to post any copyrighted
material unless the copyright is owned by you or by AJOR. The owner, administrators
and moderators of AJOR reserve the right to delete any message or members for
any or no reason whatsoever. You remain solely responsible for the content of
your messages, and you agree to indemnify and hold harmless AJOR, the administrators,
moderators, and their agents with respect to any claim based upon transmission
of your message(s). The use of profile signatures to intentionally mislead or misdirect any member on this forum is not acceptable and may result in your account being suspended. Any trip that is organised through the AJOR forum is participated
at your own risk. If you or your vehicle is damaged it is your responsibility,
not that of the person that posted the thread, message or topic initiating the
trip, nor the organisers of AJOR or moderators of any specific forum. This forum
and associated website is the property of AJOR. No user data is harvested and no information supplied in your registration will be sold for profit.
Hd crossover steering for dana 30/44
