TJ: Skwakes 97 Wrangler (rescue) and build up

[carlosprite]

Nice looking rug mate, like those flares too; might look into them.

[Cornelius]

Hi there !

I noticed you have spacers between the chassis and the belly plate to which the gearbox mounts ? Where did you get those and did you have to modify the gearbox mount in order to fit them ?

I do not have spacers in there and have found some rust on the plate and chassis rail ......luckily I found it early so no real harm done. Spacers looks like it will eliminate the risk of happening again .......hence I'm keen to find out a little more .....

cheers

[skwake]

I sent you a PM mate but I am pretty sure those pucks are just part of a transfer case drop package, It was on the Jeep when I bought it so dont really know too much about it, Ill probably look at changing that setup down the line for a bit more underbelly clearance.

[carlosprite]

Originally Posted by Cornelius

Hi there !

I noticed you have spacers between the chassis and the belly plate to which the gearbox mounts ? Where did you get those and did you have to modify the gearbox mount in order to fit them ?

I do not have spacers in there and have found some rust on the plate and chassis rail ......luckily I found it early so no real harm done. Spacers looks like it will eliminate the risk of happening again .......hence I'm keen to find out a little more .....

cheers

Unless you have driveline vibes, I would not think about putting one on, would most likely cause problems.

Just clean the rust, and spray it with some rust proof paint.

[skwake]

yeah the previous, previous owner of my jeep (the person that actually built it up to begin with) must have been extra worried about driveline angles cos I have the Transfer drop and also the SYE kit installed

[Will239]

Nice work mate! love the switches. I have the same lights too, am happy with them as well.

How much were the sliders and where from?

[skwake]

Sliders were from Jeepkonection. here is a link, http://jeepkonection.com.au/proddeta...BAR_Slider_XRC
you can get them with or without a step.

$380 with the step.

As I said, my buddy sprayed them gloss black but they are strong as hell, lots of protection!