Quote:
Originally Posted by bruggz351
I think so Jj. In other words, install another relay to switch the current relay. ??
The new relay replaces my current switch. BUT, I use my switch to activate the new relay using +12v.?
Sent from my FRED
|
Basically you feed +12v to your switch, use this switch to control a relay, (switched +12v into 86, gnd to 85) use the contact of this relay to switch the ground (from the yellow wire from the head light loom) (30 to headlight loom, 87 to gnd)
If you need a diagram let me know....