Testing: To test a glow plug put on an ohmmeter and check resistance. If the resistance is low (3 ohms or less) then they are good but if it goes up to a high number 100+ then it is bad and needs to be replaced.
OBD2 Codes: The following CEL codes you will get if one goes bad: P0671 (plug 1), P0672 (plug 2 and so on), P0673, P0674, P0675, P0676.
Parts: The CRD glow plug is 4.4v. Mopar Part# 68102087AA – Bosch Part # 80047 – Beru part # 750 33010 244 – Mercedes Benz Part # 001 159 50 01 or 001 159 71 01). Please note that the Sprinter Vans allegedly uses a different glow plug (7.7v) than the WK so be careful when ordering. Also the glow plug module might go bad leading to more glow plug failures so you’ll want to check on it as well (below). The Glow Plug Module Part # is: 68013182AB
__________________
08 Grand Cherokee Overland CRD
2014 Grand Cherokee Overland CRD
|