TJ: Flexys minor make over

[flexytj]

ok so my jeep is getting a few changes in the coming months which i have started buying parts already i will post pics next week and keep you regularly updated as i go ( probably slowly ) .

the plan is to put some stronger diffs under the tj with a high steer setup
.i also want to remove the body lift and maybe fit slighlty
lower coils as i want to achieve a lower roll centre .


so far i have had a rollgage built by Anthony from tomahawk racefab
which is in the car already . i have also purchased a set of walker evans
remote resivoir shock absorbers and a warn front bar and winch plate from
procomp that are sitting in my lounge room and i also bought a high pinion
dana 44 out of a f100 ( thanks for the tip ian )which is going to get built up
and trussed for the front and i will be getting a ford nine inch from g & j
differentials for the rear as they are relativly cheap to buy . i have also fitted
a skyjacker high clearance skid pan that i bought from caloffroad .

note : have gone with patrol diffs from a gq patrol that are being modified to suit the tj

[flexytj]

ok i got the pricing for my rear diff which i will order in feburary
i will be getting a ford 9 inch with 4.88 ratios and a detroit locker
using 31 spline axles . the qoute for the rear diff came to $3300 .

the front diff will be built up using 4.88 r&p chromo axles and longfield unis
with an arb air leaker and warn hubs and a truss

so if anyone wants a set of tj diffs with ratios and lockers already done shoot me a pm

[flexytj]

ok im going to have to hurry up the diffs as my rear diff imploded on the freeway today

[MR EXTREME JEEP]

You building it with the intention of racing it?
What sort of wheel travel you hoping to achieve?
And yeah lets see pics of the goods.
Make sure you pad the cage. Cops like padding...

[Nudge]

Hey Flex.

Paint it Yellow

[Maz]

Hey flexy,

will she be a trailer queen or keeping it for onroad duties as well?

[flexytj]

here is some pics of the cage in the car i left the cage unpainted as i am going to scrub it with a scouring pad and wd40 so it has the custom fab look like trophy trucks chassis/cages do anth also made the cross brace so i can get my seat all the way back so im not cramped in the drivers seat . and shockers in my lounge room and will be fitted when the diffs go in i am also looking at getting some hydro bump stops .