What did you do to your XJ today? 1M Views

[Billnick]

Originally Posted by JEEPCHIK

Well, I found the problem with my XJ. My dad suggested I may have a possible vacuum leak

Aren't dad's great??

[Billnick]

Been having problems with the new injectors weeping sending the fumes into the cabin. I thought the problem had fixed itself but it did it again this morning quite badly so as I was driving along I made a plan to buy some new O rings and fit them over the weekend. Wifey says to me "Do you think the smell is coming from the lawn mower you have in the back??" Yup.

[Mudmonster]

pulled all the seats and carpet out of my White jeep, boy did i find some cash under the carpet, they guy must have liked the pokies, there was $64 in $1 coins, and about $10 in 20c and 5c coins

tomorrow hepfull going to put in the clean seats, carpet and seat belts i prepared earlier.

this thing is going to look as good as they day it rolled of the production line.

[Puk]

Is that hard to do? (Getting the seats and carpet out?)

The guy i bought mine from had a big dog in there, and used to smoke in there, so it needs some work.

Puk.

[Puk]

Been having problems with the new injectors weeping sending the fumes into the cabin. I thought the problem had fixed itself but it did it again this morning quite badly so as I was driving along I made a plan to buy some new O rings and fit them over the weekend. Wifey says to me "Do you think the smell is coming from the lawn mower you have in the back??" Yup.

that's gold.

[ozjeepster]

I got the shits with mine , had the ass end all rewired & camper done at the same time & they talk nicely to each other now , then on way home ,bang coff splutter MEH , EVAC SOLINOID DIES no more gentle thud thud thud from the passenger side firewall ;( & the inhibitor switch also desided to cark it at the same time , new switch & second hand solinoid arrived from Brett @Jeeeparts & Switch going in on thursday & the solinoid made diff ;( all vac lines & power are so im looking at the evap canister next , grrrrrrrrrrrr crossing over to the dark side & getting a new V6 auto Pentastar JK 4Door is looking better all the time

[ace]

Finally figured out how to "tighten the steering box". Amazing difference to the feel. I thought the 4" wide deadspot was just something I'd have to accept.
Was gonna replace 3 tie rod ends and a drag link since they have a bit of rotational play - don't need to now! Might just do the pitman arm end on the drglink as it clicks a bit.
Easy job - took some pics will put up a quick guide if the search doesn't yield one again.
I have a FSM but having a guide to do everything on a bench isn't always useful.