Steering Damper

[C0xy]

http://www.blackjackwelding.com.au/o...&category_id=3

check this one from black jack welding

[slayer]

Does anyone have a pic if the blackjack bracket on their tj??i would love to see how it mounts up!

[hophoar]

I'm curious also. I don't think it will solve my problem though. looks like it fits at the axle end.

[victoro]

It does fit at the axle end, it looks like your problem is the raised pin for the return to centre end of your dampiner, first this is far from a correct fit, it seems you have been sent the wrong part, notice the complex angle at the bushing end, this is far to much, best bet would be to replace it with a standard (non return to centre) style dampiner and replace this pin (most replacements supply this pin).

I hope this helps.

[jsjeep]

What I want to know is how did you get the stock tapered bolt out? I've tried a taper bolt fork and everything n no go lol

[hophoar]

It came out relatively easy, use a BF Hammer just like a ball joint.

[victoro]

Originally Posted by hophoar

It came out relatively easy, use a BF Hammer just like a ball joint.

X2 on this one.