XJ Sliders?

[Easy Rollins 1]

Anyone build or import sliders to suit the XJ at a reasonable price?

I'd make 'em,but am time poor.




If Not I'll make a few to offset the cost...anyone want some,have and shape ideas?

[ceven]

I made my own, using the design from steve f, the info is on here somewhere. Not sure of any you can buy off the shelf.

[junglejuice]

I've been looking at making some for quite a while now but there has always been something else in the way, I may have to do some soon...

[Steve F]

Easy to make and fairly minimal welding even if you have to pay to get the welding done. Mine have taken some big hits with no problems or hints of damage to the body :)

Cheers
Steve

[Negdriver]

Easy to make and fairly minimal welding even if you have to pay to get the welding done. Mine have taken some big hits with no problems or hints of damage to the body :)

Cheers
Steve

How many drinks will it cost to bribe you into making me one? ;)

I don't want to bore myself searching the net for something that is right in front of me :smile:

[ginjaninja]

Or you could just buy mine lol

[Easy Rollins 1]

Easy to make and fairly minimal welding even if you have to pay to get the welding done. Mine have taken some big hits with no problems or hints of damage to the body :)

Cheers
Steve

Is there a link to the build Steve?

[Steve F]

Here's the two threads, the first is the main build the second is adding the tube section

http://www.ausjeepoffroad.com/forum/showthread.php?t=62271

http://www.ausjeepoffroad.com/forum/showthread.php?t=63360

Cheers
Steve

[Easy Rollins 1]

Thanks Steve,big help.;)

[rainman]

This is what I did.
http://www.ausjeepoffroad.com/forum/showthread.php?t=90354
good luck with it.

[Easy Rollins 1]

Thanks heaps,I have a length of 50x75 left over from a trailer build.Was thinking it was a bit much,but will use it up now. ;)

[xjrob]

Reply, when i did mine i used this site as template and copied them, the stage one has more pics, but i added tubes like stage 2

full list of what materials and hardware they used and i just copied

http://www.jcroffroad.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=XJSL1&Category_Code=XJSL

[Hamsteh]

This is what i want to make:

http://www.eriejeeppeople.com/ejpforums/index.php?showtopic=2651

I love the look and the simple design, personally prefer the wider boxsteel to the thinner with tube.

[Easy Rollins 1]

Great stuff.Anyone know where to get those large self tappers?