PDA

View Full Version : Electric fan conversion


robxj
04-11-2011, 07:35 PM
Does anyone know if there are any electric rad cooling fans that will fit with or without mods that i can get from another 4x4??

junglejuice
04-11-2011, 07:55 PM
I used a 16" high flow fan and set mine up in a dual speed arrangement with the stock fan so they both run all the time just in a high/low set up.....

rainman
04-11-2011, 07:57 PM
Have you read the articals on gojeep?

robxj
04-11-2011, 08:02 PM
I used a 16" high flow fan and set mine up in a dual speed arrangement with the stock fan so they both run all the time just in a high/low set up.....

what / where did you get your fan set up from?

robxj
04-11-2011, 08:02 PM
Have you read the articals on gojeep?


No wheres that?

junglejuice
04-11-2011, 08:08 PM
what / where did you get your fan set up from?

The fan from ebay, the dual speed controls from my head....

rainman
05-11-2011, 08:35 PM
Put gojeep into google

junglejuice
06-11-2011, 04:00 AM
Or try

http://www.go.jeep-xj.info/

robxj
07-11-2011, 06:55 PM
not a bad site that, lots of usefull info, now on the search for a fan, may import 1 from the us if i cant fine 1 in a wreckers.

rainman
08-11-2011, 03:21 PM
I got my taurus fan off ebay usa. Very happy with it.

Nakkas
23-11-2011, 09:18 PM
This is my setup. Using 3 x 10" fans

http://i956.photobucket.com/albums/ae48/siggas/IMAG0207.jpg

Pandave
27-11-2011, 07:26 AM
is that the dirtbound fan from the states nakkas?

Nakkas
27-11-2011, 04:42 PM
10" fan from Ebay... Is there anywhere else you buy stuff??

Pantsly
28-11-2011, 05:53 PM
Mate, Ive got a streeker 3000cfm fan already fitted to a cherokee shroud all polyurathaned in(neatly) and never used, just drop it in. PM me if your interested.

Dudzy
28-11-2011, 08:09 PM
Hey nakkas, how do the three fans cope with water crossing etc?

Nakkas
29-11-2011, 06:51 AM
Haven't tried that yet. They are controlled by temp sensors. I would assume that when the radiator hits the water, the engine temp would drop and the fans would switch off. You could use a bypass switch..

rastus2571
29-11-2011, 04:54 PM
Talk to junglejuice mate. He came over my house on Sunday and he has done a twin thermo conversion. Very neat job and factory looking so to speak.

He is an electrical guru. Nearly rewired his XJ from what I was looking at.

He's a sparky by trade.

He be da man to talk to...