View Full Version : Custom belly up
Moses
21-07-2012, 04:47 PM
got a bit of work happening on the TJ in the next couple of weeks and was thinking about a belly up while i'm at it
tho the budget wont allow for a store bought one so thinking custom could be a go.......budget is what lies behind all fubar-fab :rolleyes:
so i am asking for ideas and possabe specs on any custom jobs done
cheers
Moses
Tassie Jeeper
21-07-2012, 07:41 PM
there are a few about im sure someone will pull through with some pics for u or just copy one of the one's u buy
Breezy
21-07-2012, 08:52 PM
http://www.ausjeepoffroad.com/forum/showthread.php?t=84752
Heres mine from a few yrs ago!!!!
Moses
21-07-2012, 10:26 PM
i like that Breezy, great job and does not look too hard to do
Tassie Jeeper
22-07-2012, 02:52 PM
http://www.ausjeepoffroad.com/forum/showthread.php?t=84752
Heres mine from a few yrs ago!!!!
just had a flick through the pics there great job r u still running this setup how well has it held up and was the tailshaft ok once the 1"mml was fitted:cool::cool:
Breezy
22-07-2012, 09:22 PM
Yep all working sweet been running in comps last 2 years and still holding up perfect but it has also had a stretch!!!!!!!!!!!!!!
brenttj
22-07-2012, 09:27 PM
has anyone done one without puttin in a new cross member as the stock one just bolts to the stock skid
josh9465
22-07-2012, 09:51 PM
heres mine. 1/4" plate. bit over kill but i got it cheap. its able to jack up on.
http://www.ausjeepoffroad.com/forum/attachment.php?attachmentid=55740&stc=1&d=1342957630
http://www.ausjeepoffroad.com/forum/attachment.php?attachmentid=55741&stc=1&d=1342957691
http://www.ausjeepoffroad.com/forum/attachment.php?attachmentid=55742&stc=1&d=1342957691
http://www.ausjeepoffroad.com/forum/attachment.php?attachmentid=55743&stc=1&d=1342957691
http://www.ausjeepoffroad.com/forum/attachment.php?attachmentid=55744&stc=1&d=1342957691
brenttj
22-07-2012, 09:56 PM
yeah i like it josh i might give mine a crack w/e after next going to go for as flat as i can get
josh9465
22-07-2012, 11:06 PM
i prob could have made it 1inch less. but i didnt have a body lift then.
Josh, did you have to do anything to the exhaust? And how's access to the 'Rock Ready' deeper tranny pan. Looks like the skid needs to come off to remove the tranny pan.
Fat Chili
23-07-2012, 02:50 AM
Moses - is your TJ manual or auto?
Moses
23-07-2012, 03:58 AM
Moses - is your TJ manual or auto?
manual mate
josh9465
23-07-2012, 08:28 PM
Josh, did you have to do anything to the exhaust? And how's access to the 'Rock Ready' deeper tranny pan. Looks like the skid needs to come off to remove the tranny pan.
yeah wes the skid needs to be removed to get to the pan. but the new pan has a drainage nut.
no exhaust mods. if you see the brace on the inside has a bit taken out to compensate for the cat converter.
Fat Chili
24-07-2012, 11:11 PM
manual mate
Give me a call some time, may have a few presents that can assist you with making a TT.
Tassie Jeeper
25-07-2012, 11:43 AM
Give me a call some time, may have a few presents that can assist you with making a TT.
u havent got templates have u chilli?:rolleyes::cool:
vBulletin® v3.8.7, Copyright ©2000-2024, vBulletin Solutions, Inc.