View Full Version : Xj cherokee replaced oxy sensors still rich!
Tuffeb
18-11-2012, 01:14 PM
Any other solutions?
Injectors? Fuel pressure reg? Tps?
Can't think on anything els
Replaced both oxy sensors still runs rough and big patch of black carbon comes out
All spark plugs are black
Tuffeb
18-11-2012, 01:31 PM
Did the code test wich is really cool by the way
Got 13
Vaccum line map sensor from what I can see
Tuffeb
18-11-2012, 01:36 PM
Dosent do the 55 flashes at the end tho after 5 mins of waiting
Just get the 13 flashes n that's all
Tuffeb
18-11-2012, 01:45 PM
No read that wrong
In getting code 12
Then 55
Jonny Jeep
19-11-2012, 02:52 AM
Map sensor can cause problems if the small rubber tube at the bottom is bad. Another thing that can cause rich running is the engines temp sensors. You can check temp sensor resistance against this chart.
http://farm5.staticflickr.com/4017/4390712792_4a2867313d.jpg
rainman
19-11-2012, 06:25 AM
Check your fuel pressure.
Tuffeb
19-11-2012, 07:30 PM
What should fuel pressure be at normally?
rainman
20-11-2012, 10:18 AM
Obd1 31psi @ idle. 39psi At idle with the fuel pressure regulator (fpr) vac hose off and plugged.
Obd2 49 psi constant
Also check the vac line is not sucking petrol from the fpr diaphragm being ruptured if obd1.
vBulletin® v3.8.7, Copyright ©2000-2024, vBulletin Solutions, Inc.