heater control cable location

[Roler]

Heater control not working anymore, had similar prob in past, was due to heater control cable coming off, now suspect the same.
Had it 'fixed' (advised not to turn it all the way since it was 'only just' on there, so want to do it myself this time.
Anyone a tip how to get to it? Taking centre plastic panel off?
Can't find anything on this in the FSM.

Cheers

[anthonygubbin]

Heater control not working anymore, had similar prob in past, was due to heater control cable coming off, now suspect the same.
Had it 'fixed' (advised not to turn it all the way since it was 'only just' on there, so want to do it myself this time.
Anyone a tip how to get to it? Taking centre plastic panel off?
Can't find anything on this in the FSM.

Cheers

Do you know how to get the centre shroud off?

Regards A

[Roler]

I know this is one end, but how do I get to it?
Need I remove the whole 3-knob control panel?
58921

[Roler]

That should be attached with just clips right? Mine just doenst want to come off..

[anthonygubbin]

I know this is one end, but how do I get to it?
Need I remove the whole 3-know control panel?
58921

Have a look under your glove box. No need to dismantle anything just yet.

Regards A

[Roler]

Do you know how to get the centre shroud off?


U mean the centre console or the thing thats around the radio/vents etc?

[anthonygubbin]

U mean the centre console or the thing thats around the radio/vents etc?

The thing that sits around the radio and heater controls. But you don't need to take it off to get to what you showed me.

Regards A

[Roler]

Have a look under your glove box. No need to dismantle anything just yet.

And yes, thats where the loose cable was, thanks A!
This must have been the easiest repair I will ever do on the Jeep
(once I knew where to find it ;). Still wondering why the guys at my repair shop stated it wass such a hassle the first time....guess they took the other end approach or something.

Anyway, big thank you, again, mate.

[anthonygubbin]

Excellent glad you got it sorted. Now I need to see if anyone can come to my rescue before I order bits for my transfer case.

Regards A