Spring spacers

[Lushy]

How do I go about putting spacers on top of the springs?
1. Do I have to remove the springs?
2. Is that a hard Job?

[hillsjeep]

I found this when investigating the same for my XJ, don't know if the TJ would be different though...

http://www.trailmastersuspension.com/instructions/JC240_JC240G.pdf

[Steve F]

How do I go about putting spacers on top of the springs?
1. Do I have to remove the springs?
2. Is that a hard Job?

1. Yes
2. Not that hard, for the front disconnect the swaybar, shcoks and possibly lower control arms, do one side at a time so you can get the LCA's hooked up again. I can do the XJ blindfolded now I've had the springs out that many times ;) For the rear, well not sure but I imagine it's much the same.

Cheers
Steve

[Vman]

1. Yes
2. Not that hard, for the front disconnect the swaybar, shcoks and possibly lower control arms, do one side at a time so you can get the LCA's hooked up again. I can do the XJ blindfolded now I've had the springs out that many times ;) For the rear, well not sure but I imagine it's much the same.

Cheers
Steve
What Steve F said.
I just did mine, the rear same as the front but you wont have to disconnect the lower control arms, one side at a time. The first side will be easier then the second but it's still an easy DYI job. Have fun and make sure the Jeep is on secure stands not just on the jack!!!

[bonza]

I used this procedure

http://www.4x4xplor.com/REBB.html

[Lushy]

Thanks to all of you - internet mmmmmmmmmmm so easy