Expressions of interest. Sway bar fix.

[MR EXTREME JEEP]

About to orginize a run on these brackes designed to keep the swaybar from shifting to one side.
PM me if your interested. Looking about $30 a pair. Complete with bolts.
As i said "EXPRESSIONS OF INTEREST" ONLY.
http://www.aussiejeepimages.com/gallery2/d/88365-2/Retainer.jpg

Just trying to establish the quantity required first...

[itchy]

i'm in E.J

[killa]

For those that don't know, like me, can you tell us why we would need one of these?
You say sway bar shifting? Under what circumstances? Is this only for certian lifts? etc..

[H.G.]

your sway bar sometimes works its way all the way over to one side..
this brakcet would keep the sway bar central Im not actually sure of any other purpose other than its a pain in the arse when connecting and disconnecting your sway bar links so this makes it less of a probblem.

[MR EXTREME JEEP]

Yeah HG is right on the money. When you lift your truck the swaybar has a tendancy to shift accross to the left. This creates two problems.
1) The swaybar becomes alot more difficult to reconnect as it doesnt line up with the locating pins. Hammers, crowbars ppl standing on front bars are just one way of helping reconnecting swaybar links.
2) When the swaybar shifts over to one side Ifind with my alloy rims (non offset) my tyre hits the swaybar on full lock and this chews off the corner of the lugs on the tyre.
These little clamps will keep the swaybar from shifting so eleviating these 2 problems.

[Maddragon]

Put me down for one too, please. :)

[arzzs]

EJ, i have taken it upon myself, to be the AJOR tester.

Therefore i will need a FREE SAMPLE PAIR TO ENSURE THE SAFTEY OF AJOR USERS :D :rolleyes:
















Thanks EJ :D hahahahaha

[cj5350]

Mate, good Idea if you can have them made localy but you can buy them for 7.00 usd over the net or even form your local engineering shop..
http://www.4x4xplor.com/images/swaybar-fix/swaybar-fix05.jpg

goto http://www.mcmaster.com/ and type in part number 6436K48

[Chief]

or about $2.50 each from bunnings, supercheap or exhaust shop.

should do pretty much the same thing if you got the correct diameter.

http://img.alibaba.com/photo/50975440/Exhaust_Hangers.summ.jpg

[YankeeDave]

i get them from a place in dandenong for work. they're called shaft collars.

i think i payed $15 each, i'll get the place's details at work this week.

[Gildo]

So $15 ea would be pretty close to $30 a pair eh?

[MR EXTREME JEEP]

EJ, i have taken it upon myself, to be the AJOR tester.

Therefore i will need a FREE SAMPLE PAIR TO ENSURE THE SAFTEY OF AJOR USERS :D :rolleyes:
















Thanks EJ :D hahahahaha



iTS OK MATE. jUST BUY 1 FROM bUNNINGS OR $7 from the us..

[Ando_13]

Interested in a pair, have a mate who might want these as well so maybe 2 pair.

[krankieone]

Keep me posted Mate looks like better idea than 2 cable ties & a fair bit of good luck

[Roachy]

Mate, good Idea if you can have them made localy but you can buy them for 7.00 usd over the net or even form your local engineering shop..
http://www.4x4xplor.com/images/swaybar-fix/swaybar-fix05.jpg

goto http://www.mcmaster.com/ and type in part number 6436K48

I am interested in where you got your shaft collar? Was it local or from the web site you listed (and is that part No. correct)? It looks like it is a Black Oxide - is that right and how long have you had it on? Did you consider a stainless or even a nylon collar (to minimise corrosion probs)?

[MR EXTREME JEEP]

Just a question for Tj drivers. Do all models have the same diameter stabilizer bar?

[YankeeDave]

whats the diameter?

the jeeps at home so can't measure it today

[stu]

yep, hose clamp from super cheap works for me.

[Laz]

Crap - just ordered a MUCH more expensive set from 4wd.com

http://www.4wd.com/productdetails.aspx?pid=FTS94043

:(

http://www.4wd.com/catalog/products/large/fts94043.jpg

[YankeeDave]

ok the cheapest i can get them for in dandenong is $22.50 each.