What did you do to your WH/XH today?

[WH_5.7L]

Got rid of that ugly intake. 3.5 aluminium pipe and a 90 degree silicone hose. Used a 1/2" wire grommet for the sensor.

[MRGC]

Its 1500 x 1250. Clears sunroof perfectly. Honestly don't know why rhino rack didn't make one for these.

Thanx TJ, I might go the same tray but slightly shorter ending just before the sunroof.

The height is perfect.


Sent from my iPhone using Tapatalk

[MRGC]

Got rid of that ugly intake. 3.5 aluminium pipe and a 90 degree silicone hose. Used a 1/2" wire grommet for the sensor.

Any pics of the sensor install, another thing i will be doing.


Sent from my iPhone using Tapatalk

[WH_5.7L]

Any pics of the sensor install, another thing i will be doing.


Sent from my iPhone using Tapatalk

Just got this pic. The sensor was easy just drill a hole and place the sensor inside rubber grommet and secure.

[WH_5.7L]

Tyres and rims on with 1.5" wheel spacers. Tyres stick out about 1". Boos Bashplates, JBA Uppers and DBA T2 slotted rotors have arrived.

[Mr_TT-89]

past three days, custom made nudge bar at home, stedi type x pros and relocated UHF antenna, also moved light switches and UHF to the overhead console (have now filled the hole with a UHF rocker RJ45 socket

[WH_5.7L]

Bought everything I needed for a refresher of the suspension.

Still waiting on the Lovell's lift to arrive ordered 22nd September, been told they are waiting on front shocks which should arrive 22nd December. Holiday booked for 30th so cutting it close. 3 month wait better be worth it.

Got her booked in at 4wdUSA here in Perth for a full check over and all fluids replaced (front & rear diffs, transfer case, transmission, engine and coolant).

[Windex]

Swapped my spare diff in (kinda), been wrestling with park brake cables as they are a total beast. At least she is now resting on the springs with all the control arms bolted up, the factory arms are actually in pretty good nick considering the use they've seen. I will say the pan hard rod was a monster to get to line up and suspect it chewed up the threads on the bolt to get it in.

[MRGC]

If your talking about installing the handbrake at the axle end I agree, my superlift is finished but that’s what’s holding me up.


Sent from my iPhone using Tapatalk