Quote:
Originally Posted by Maxfli113
The LH front No 1, remove engine cover, remove 2 x Tork bolts holding a small electrical connection box and move out of the way, cut zip tie holding other tubing against fuel rail (I think) and then remove glow plug electrical connector, use long 8mm socket and flexible knuckle and 3/8 drive ratchet to remove.
The RH rear No 6, remove engine cover, remove RH engine cover retaining bracket (10mm bolt), remove glow plug electrical connector, then use 8mm long socket and small extension bar and insert at the back of electrical wires carrier and remove with 3/8 drive ratchet.
|
You have me confused I thought #6 GP was the L/H rear. (L/H means your looking forwards too.) Anyway it's the rear L/H plugs that's covered with wires and plastic casings and metal brackets. I'll take a photo, may my 06 model has a different set of crap covering it?