Quote:
Originally Posted by XJKEE
What sort of front disks are they. They look pretty good with the slots.
|
I cant remember what brand they are, got them off ebay.
This is what l posted on a different site, lm been lazy.
Now for the rear. The problem with the dana35c diff, is that the axles are held in by a c clip in the diff centre which has to be removed to get the axles out. Good excuse to replace the diff oil. Then pulled the drums off.
Then put on the new bolts, spacer, backing plate and handbrake setup.
Then the new rotors and calipers (l painted then aswell). I had to grind down the caliper mounting on the backing plate, as the caliper wouldnt fit over the rotor.
My only problem is the studs as way to short now, so will have to pull the rear brakes apart again and diff, to change the studs. Just incase anyone is interested, the rear brakes are off a AU ford, could have went with a BA, but would have to change the wheels to 16".