What did you do to your XJ today? 1M Views

[XJeepers]

Tidied up the UHF install in the over head console.

Went to Bunnings and got a drawer knob to sort out the hanging mic cable:

Reused the remote door flap as some fill above the UHF:

[fat joe]

XJeepers - how good are those new smaller UHF's? - i also used one of those black knobs to tuck the cord away.

excellent spot for it.

[XJeepers]

Originally Posted by fat joe

XJeepers - how good are those new smaller UHF's? - i also used one of those black knobs to tuck the cord away.

excellent spot for it.

And here I was thinking I came up with something original

[riplock]

Fitted another new Crank position sensor.
Hope I have more luck with this one,
getting better at putting them in

[Hamsteh]

Originally Posted by riplock

Fitted another new Crank position sensor.
Hope I have more luck with this one,
getting better at putting them in

Always a useful skill to have for an XJ owner

[anthonygubbin]

Fitted all my cooling system bits as said in another thread. But bugger me after it all went back together only now do I realise the reason the water pump pulley looked out was because the HB has shifted outwards about 3-4mm, (thanks Taz). Just when I thought I was on top of things...... 6.5hrs on the bus and 4-5hrs putting it back together and now I find out why it suddenly had a slight miss. And I kept looking at the HB the last three days thinking is that right, that looks like clean, shiney rubber.

regards A

[tazwegion]

Originally Posted by anthonygubbin

6.5hrs on the bus and 4-5hrs putting it back together and now I find out why it suddenly had a slight miss.

Sounds like not changing those aged spark plugs has come back to bite you