Folks, some of you would be aware of Nobby's recent problem with his new rear control arm bushing disintegrating after only five weeks of use. If not I suggest you have a look through the LOST thread on this subject (complete with photos):
http://www.lostjeeps.com/forum/phpBB...p?f=93&t=63326
It seems that Nobby, through another member, sourced his rear control arm bushings from Morris 4x4 in the USA. This is not the first instance that we have heard of where the Morris 4x4 supplied bushings have failed - their clevis bushings have developed a reputation for collapsing in a matter of weeks.
I am sure cmohr and others will have more to say on this topic.
I wanted to let the KJ Forum members know that I have emailed Morris 4x4 management about this problem (on their published email address for customer service
customerservice@morris4x4center.com
I will pass on any rely that I receive from them.
Anyone that has had problems with the Morris 4x4 suspension bushings is encouraged to email them as well so as to make them aware of the scope of the problem here in Australia and the potential business impacts this may have both directly through lost sales and word of mouth through the Jeep community worldwide.
glend