Currently tossing up whether I should remove the front bumper this eve in preperation for Saturday's big install. Also waiting, two weeks now for my headlight inserts to arrive . I keep getting told any day now. Heck the place is not even a Jeeps parts supplier . I am hanging to get the 90/130's back in again.
Regards A
__________________
Lay down with dogs and you will wake up with fleas; scratching the surface not treating the disease. Over 5'000 Club
Hubs are done. Turns out the ones supplied weren't timken units but I needed them anyway so went with what was available. Had to buy the 36mm socket and a breaker bar to suit and it all went quite well, both sides done in about two hours.
Props to Supercheap too, I managed to break my 4 year old Sidchrome 3/8" rachet today and I had broken the 3/8" little breaker bar in my kit a while ago. Went into Supercheap, the guy pulled one of the kits off the shelf and swaped out my stuffed parts for brand new ones, no questions asked or receipts needed. Quite happy.
I also tried the fabled 1:1 mix of acetone and ATF today in place of WD40. Works quite well from what I found.
fixed an exhaust leak between the top and bottom parts of the headers.
finally got around to extending the breather hoses on the trany and transfer case, and putting a breather on the dizzy.
also made a led that plugs between a injector and the harness to flash when ever the injector pulses
fixed an exhaust leak between the top and bottom parts of the headers.
finally got around to extending the breather hoses on the trany and transfer case, and putting a breather on the dizzy.
also made a led that plugs between a injector and the harness to flash when ever the injector pulses
I like the enviromentally friendly cable ties...
Is the LED mod a test unit or are leaving it in full time?
AJOR does not vouch for or warrant the accuracy, completeness
or usefulness of any message, and are not responsible for the contents of any
message. The messages express the views of the author of the message, not necessarily
the views of AJOR or any entity associated with AJOR, nor should any advice
be substituted as technical advice replacing that of a mechanic. You agree,
through your use of this service, that you will not use AJOR to post any material
which is knowingly false and/or defamatory, inaccurate, abusive, vulgar, hateful,
harassing, obscene, profane, sexually oriented, threatening, invasive of a person's
privacy, religious, political or otherwise violative of any law. You agree not to post any copyrighted
material unless the copyright is owned by you or by AJOR. The owner, administrators
and moderators of AJOR reserve the right to delete any message or members for
any or no reason whatsoever. You remain solely responsible for the content of
your messages, and you agree to indemnify and hold harmless AJOR, the administrators,
moderators, and their agents with respect to any claim based upon transmission
of your message(s). The use of profile signatures to intentionally mislead or misdirect any member on this forum is not acceptable and may result in your account being suspended. Any trip that is organised through the AJOR forum is participated
at your own risk. If you or your vehicle is damaged it is your responsibility,
not that of the person that posted the thread, message or topic initiating the
trip, nor the organisers of AJOR or moderators of any specific forum. This forum
and associated website is the property of AJOR. No user data is harvested and no information supplied in your registration will be sold for profit.
. I keep getting told any day now. Heck the place is not even a Jeeps parts supplier 
. I am hanging to get the 90/130's back in again. 
