What do I do now ? ? ? ?
I recently got new shocks and coils installed by Superior Engineering in QLD. After the install I had driveline vibration issues, and after replacing the gearbox mount the vibrations were still there. Superior made some calls and the advice coming back was adjustable rear upper control arms. So after a bloody long wait ( over a month ) I got given the arms together with (it should be an easy driveway install , adjust them 5 mm over standard)
So I read and read and read as much as I could and found an install write up , so off I went and installed them in the driveway.
I can see the rear axe is not centred , I could not get the adjustables installed where both sides are of equal adjusted lenght. The one side is 5 mm over standard and the other is at least 10mm or more. Im also worried because the rear shocks are hard up against the lower coil mounts ........what the hell do I do now ? I'm not confident to drive the car as is , and have no clue where to take it to get the problem sorted. Do I now need an adjustable rear track bar ? All this Sh@t after Superior Engineering assured me there will be no issues. I don't want to go back there .......
The lift is 3.5" and yes I have a SYE installed.
I'm out on Bribie Island north of Brissie ...........so looking for help close by ......anybody ? Any ideas ? Please ?
|